Fort Myers, FL – March 11, 2010 – Crystek's CVCO55CC-2580-2650 VCO (Voltage Controlled Oscillator) operates from 2580 MHz to 2650 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3...

Fort Myers, FL, December 22, 2009 - Crystek has introduced a new line of low-loss RF coaxial cable assemblies featuring rugged stainless-steel solder-clamp construction and attenuation of 0.36 dB/ft. at 18 GHz. The LL142 Series cable offers shielding effectiveness of greater than -110 dB with an operating temperature range of...

Fort Myers, FL - October 22, 2009 - Crystek's CRBV55CW-0500-1000 RedBox VCO (Voltage Controlled Oscillator) operates from 500 MHz to 1000 MHz with a control voltage range of 0.5V~18.0V. This VCO features a typical phase noise of -104 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically...

Fort Myers, FL - October 15, 2009 - Crystek's CRBV55CW-1000-2000 RedBox VCO (Voltage Controlled Oscillator) operates from 1000 MHz to 2000 MHz with a control voltage range of 1.0~20.0V. This VCO features a typical phase noise of -100 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically...

Fort Myers, FL - October 8, 2009 - Crystek's CPLL58-4240-4240 PLL/Synthesizer operates at 4240 MHz with a typical Step Size of 2500 KHz. Engineered and manufactured in the USA, the model CPLL58-4240-4240 is housed in a compact 0.582-in. x 0.8-in. x 0.15-in. SMD package, which saves board space.

Crystek's PLL/Synthesizer construction...

Fort Myers, FL - October 1, 2009 - Crystek's CPLL66-3475-3475 PLL/Synthesizer operates at 3475 MHz with a typical Step Size of 2500 KHz. Engineered and manufactured in the USA, the model CPLL66-3475-3475 is housed in a compact 0.6-in. x 0.6-in. x 0.15-in. SMD package, which saves board space.

Crystek's PLL/Synthesizer construction...

Fort Myers, FL - September 25, 2009 - Crystek has been named the exclusive franchise USA distributor of Rubidium and GPS Time Sources from AccuBeat of Israel. AccuBeat's line of Frequency Standards provide precision signal timing for applications such as test & measurement equipment, military and satellite communications, and wireless...

Fort Myers, FL - September 18, 2009 - Crystek's CRBV55FL-0200-0239 RedBox VCO (Voltage Controlled Oscillator) operates from 200 MHz to 239 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically...

Fort Myers, FL - September 11, 2009 - Crystek's CPLL58-3900-4300 PLL/Synthesizer operates from 3900 MHz to 4300 MHz with a typical Step Size of 2500 KHz. Engineered and manufactured in the USA, the model CPLL58-3900-4300 is housed in a compact 0.582-in. x 0.8-in. x 0.15-in. SMD package, which saves board...

Fort Myers, FL - September 3, 2009 - Crystek's CRBV55CL-0902-0928 RedBox VCO (Voltage Controlled Oscillator) operates from 902 MHz to 928 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -115 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically...

Fort Myers, FL - August 21, 2009 - Crystek's CPLL58-1800-1860 PLL/Synthesizer operates from 1800 MHz to 1860 MHz with a typical Step Size of 10 KHz. Engineered and manufactured in the USA, the model CPLL58-1800-1860 is housed in a compact 0.582-in. x 0.8-in. 0.15-in. SMD package, which saves board space.

Crystek's...

Fort Myers, FL, August 14, 2009 - Crystek Crystals announces the release of a 1.090 GHz SAW Clock Oscillator (CCSO) - the CCSO-014-1090. Crystek designed the module using SAW (surface acoustic wave) crystal technology to provide a low noise, low jitter performance with true SineWave output. The resulting oscillator features...

Fort Myers, FL - July 30, 2009 - Crystek's CRBV55CW-0200-0400 Red Box VCO (Voltage Controlled Oscillator) operates from 200 MHz to 400 MHz with a control voltage range of 0.0V~5.0V. This VCO features a typical phase noise of -105 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is...

Fort Myers, FL - July 23, 2009 - Crystek's CRBV55FL-0136-0174 Red Box VCO (Voltage Controlled Oscillator) operates from 136 MHz to 174 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is...

Fort Myers, FL - July 16, 2009 - Crystek's CPLL66-2416-2553 PLL/Synthesizer operates from 2416 MHz to 2553 MHz with a typical Step Size of 100 KHz. Engineered and manufactured in the USA, the model CPLL66-2416-2553 is housed in a compact 0.6-in. x 0.6-in. x 0.15-in. SMD package, which saves board...

Fort Myers, FL - July 9, 2009 - Crystek's CPLL66-1600-2200 PLL/Synthesizer operates from 1600 MHz to 2200 MHz with a typical Step Size of 1000 KHz. Engineered and manufactured in the USA, the model CPLL66-1600-2200 is housed in a compact 0.6-in. x 0.6-in. x 0.15-in. SMD package, which saves board...

Fort Myers, FL - June 8, 2009 - Crystek introduces the new RF Pocket Reference Oscillator (RFPRO Series), the industry's first frequency control product to integrate a complete True SineWave SAW (surface acoustic wave) oscillator in a rugged SMA housing. Connecting the RFPRO Series' female SMA side to +3.3Vdc will...

Fort Myers, FL - June 3, 2009 - Crystek's CVCO55CC-3318-3467 VCO (Voltage Controlled Oscillator) operates from 3318 MHz to 3467 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5...

Fort Myers, FL - May 15, 2009 - Crystek's CVCO55CC-3015-3045 VCO (Voltage Controlled Oscillator) operates from 3015 MHz to 3045 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -109 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically 0...

Fort Myers, FL - April 24, 2009 - Crystek's CVCO55CC-2594-3026 VCO (Voltage Controlled Oscillator) operates from 2594 MHz to 3026 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5...

Fort Myers, FL - April 17, 2009 - Crystek's CVCO55CC-1581-1581 VCO (Voltage Controlled Oscillator) operates at 1581 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -120 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +2.5 dBm.

Engineered and manufactured...

Fort Myers, FL - March 27, 2009 - Crystek's CVCO55CC-1370-1400 VCO (Voltage Controlled Oscillator) operates from 1370 MHz to 1400 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -114 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +2...

Fort Myers, FL, March 20, 2009 - Crystek's CVCO55CC-2400-2569 VCO (Voltage Controlled Oscillator) operates from 2400 MHz to 2569 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -102 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +4 dBm.

Engineered...

Fort Myers, FL, February 20, 2009 - Crystek's CVCO55CC-1700-1700 VCO (Voltage Controlled Oscillator) operates at 1700 MHz with a control voltage range of 0.3V~4.7V. This VCO features a typical phase noise of -120 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +2.5 dBm.

Engineered and manufactured in...

Fort Myers, FL, February 11, 2009 - Crystek's CVCO55CC-2480-2960 VCO (Voltage Controlled Oscillator) operates from 2480 MHz to 2960 MHz with a control voltage range of 0.5V~18V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +7 dBm.

The...

Fort Myers, FL, February 6, 2009 - Crystek Microwave has introduced a new line of attenuators, the Crystek CATTEN series. Ranging from 1 to 20 dB signal attenuation, Crystek's CATTEN models are designed in a rugged SMA housing for easy in-line connection and operation in test equipment, RF lab use...

Fort Myers, FL, January 30, 2009 - Crystek's CVCO55CC-2300-2450 VCO (Voltage Controlled Oscillator) operates from 2300 MHz to 2450 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +4 dBm.

The...

Fort Myers, FL, January 16, 2009 - Crystek's CVCO55CC-2745-2860 VCO (Voltage Controlled Oscillator) operates from 2745 MHz to 2860 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +4 dBm.

The...

Fort Myers, FL, December 19, 2008 - Crystek Microwave has introduced a new line of frequency multipliers, the Crystek Pocket Passive Doubler (CPPD) series. These CPPD models are designed in a rugged SMA housing for easy in-line assembly and operation in test equipment and general lab use.

The CPPD-0.85-2 will...

Fort Myers, FL, December 5, 2008 - Crystek's CVCO55CC-2770-2920 VCO (Voltage Controlled Oscillator) operates from 2770 MHz to 2920 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +4 dBm.

The...

Fort Myers, FL, November 26, 2008 - Crystek's CVCO55CC-2850-3210 VCO (Voltage Controlled Oscillator) operates from 2850 MHz to 3210 MHz with a control voltage range of 0.5V~14V. This VCO features a typical phase noise of -103 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +4.0 dBm.

The...

Fort Myers, FL, November 21, 2008 - Crystek’s new CVCO55CXT-6250-6250 Coaxial Resonator Oscillator (CRO) employs frequency doubling, 2X fundamental technology to reach new performance levels of lower phase noise and much lower harmonics over the competition, while achieving lower current consumption in the process.

The CVCO55CXT-6250-6250 operates at 6250 MHz with...

Fort Myers, FL, November 14, 2008 - Crystek's CVCO55CC-2269-2580 VCO (Voltage Controlled Oscillator) operates from 2269 MHz to 2580 MHz with a control voltage range of 0.5V~16V. This VCO features a typical phase noise of -107 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5.0 dBm.

The...

Fort Myers, FL, October 31, 2008 - Crystek's CVCO55CC-4267-4442 VCO (Voltage Controlled Oscillator) operates from 4267 MHz to 4442 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -104 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5.0 dBm.

The...

Fort Myers, FL, October 20, 2008 - Crystek's CVCO55CC-3901-4101 VCO (Voltage Controlled Oscillator) operates from 3901 MHz to 4101 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -104 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5.0 dBm.

The...

Fort Myers, FL, October 10, 2008 - Crystek's CVCO55CC-3619-3711 VCO (Voltage Controlled Oscillator) operates from 3619 MHz to 3711 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5.0 dBm.

The...

Fort Myers, FL, October 3, 2008 - Crystek's CVCO55CC-3366-3597 VCO (Voltage Controlled Oscillator) operates from 3366 MHz to 3597 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +5.0 dBm.

The...

Fort Myers, FL, September 15, 2008 - Crystek's CVCO55CXT-5340-5390 VCO (Voltage Controlled Oscillator) operates from 5340 MHz to 5390 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -102 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +3.0 dBm.

The...

Fort Myers, FL, August 22, 2008 - Crystek's CVCO55FL-0075-0085 VCO operates from 75 MHz to 85 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +9.0 dBm.

The model CVCO55FL-0075-0085 is...

Fort Myers, FL, August 14, 2008 - Crystek's CVCO55FL-0136-0174 VCO operates from 136 MHz to 174 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +9.0 dBm.

The model CVCO55FL-0136-0174 is...

Fort Myers, FL, August 7, 2008 - Crystek's CVCO55FL-0200-0239 VCO operates from 200 MHz to 239 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -123 dBc/Hz @ 10KHz offset and has excellent linearity. Output power is typically +9.0 dBm.

The model CVCO55FL-0200-0239 is...

Fort Myers, Florida (July 30, 2008) - Crystek Corporation has released its Model CVS575S-500 - a 500MHz Voltage Controlled SAW (surface acoustic wave) Oscillator, or VCSO. SAW crystal technology provides low-noise and low-jitter performance with true sinewave output.

The lead-free, RoHS-compliant CVS575S-500 is offered in a 5x7.5x2.5mm SMD package. Phase noise...

Fort Myers, FL, July 14, 2008 - Crystek's CVCO55BES-0950-2050 VCO operates from 950 MHz to 2050 MHz with a control voltage range of 0V~15V. This VCO features a typical phase noise of -99 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55BES-0950-2050 is packaged in the industry-standard 0.5-in. x...

Atlanta, Georgia (June 16, 2008) - Crystek continues to enhance its product portfolio with the release of the RedBox Amplifier. Crystek's model CRBAMP-100-6000 is a low-noise general purpose connectorized amplifier covering a frequency range of 100MHz to 6GHz. The amplifier is housed in a custom aluminum enclosure (1.25" x 1.25"...

Fort Myers, FL, June 6, 2008 - Crystek Corporation has expanded its line of ultra-low phase noise Voltage Controlled Oscillators (VCOs) with a new coaxial resonator oscillator. The model CVCO38CC-3660-3700 VCO is packaged in the super-compact 0.380-in. x 0.380-in. x 0.220-in. SMD package, achieving 42% space savings over the standard...

Fort Myers, FL, May 23, 2008 - Crystek's CVCO55CW-1000-1500 VCO operates from 1000 MHz to 1500 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -95 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CW-1000-1500 is packaged in the industry-standard 0.5-in. x...

Fort Myers, FL, May 9, 2008 - Crystek's CVCO55CC-0787-0805 VCO operates from 787 MHz to 805 MHz with a control voltage range of 0.3V~4.7V. This VCO features a typical phase noise of -122 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-0787-0805 is packaged in the industry-standard 0.5-in. x...

Fort Myers, FL, May 2008 - Crystek's CVCO55CC-0827-0840 VCO operates from 827 MHz to 840 MHz with a control voltage range of 0.2V~4.7V. This VCO features a typical phase noise of -124 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-0827-0840 is packaged in the industry-standard 0.5-in. x 0.5-in....

Fort Myers, FL, April 2008 - Crystek Crystals announces the release of a 1GHz SAW Clock Oscillator (CCSO). Crystek designed the module using FR5 PCB and SAW (surface acoustic wave) crystal technology to provide a low noise, low jitter performance with true SineWave output. The resulting oscillator features...

Fort Myers, FL, April 2008 - Crystek's CVCO55CC-1260-1400 VCO operates from 1260 MHz to 1400 MHz with a control voltage range of 0.5V~12V. This VCO features a typical phase noise of -115 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-1260-1400 is packaged in the industry-standard 0.5-in. x 0.5-in....

Fort Myers, FL, March 2008 - Crystek's CVCO55CC-2425-2440 VCO operates from 2425 MHz to 2440 MHz with a control voltage range of 0.3V~4.7V. This VCO features a typical phase noise of -113 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-2425-2440 is packaged in the industry-standard 0.5-in. x 0.5-in....

Fort Myers, FL, February 2008 - Crystek's CVCO55CL-0902-0928 VCO operates from 902 MHz to 928 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -115 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CL-0902-0928 is packaged in the industry standard 0.5-in. x...

Fort Myers, FL, January 30, 2008 - Crystek's CVCO55CC-1930-2110 VCO operates from 1930 MHz to 2110 MHz with a control voltage range of 0.5V~18V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-1930-2110 is packaged in the industry standard 0.5-in....

Fort Myers, FL - January 11, 2008 - Crystek's CVCO55CC-3175-3375 VCO operates from 3175 MHz to 3375 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -106 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-3175-3375 is packaged in the industry standard...

Fort Myers, FL, December 2007 - Crystek introduces the new Pocket Reference Oscillator (PRO Series), the industry's first frequency control product to integrate a complete HCMOS crystal clock oscillator in a rugged SMA housing. Connecting the PRO Series' female SMA side to +3.3Vdc produces a clean, low-jitter signal from the...

Crystek's CVCO55CX-1000-1000 VCO operates at 1000 MHz with a control voltage range of 0V~5V. This VCO features a typical phase noise of -135 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CX-1000-1000 is packaged in the industry standard 0.5-in. x 0.5-in. SMD package. Input voltage is 5.0 V, with...

Fort Myers, FL - November 16, 2007 - Crystek's CVCO55CC-2778-2945 VCO operates from 2778 MHz to 2945 MHz with a control voltage range of 0.1V~16V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-2778-2945 is packaged in the industry standard...

Fort Myers, FL - October 30, 2007 - Crystek's CVCO55CC-2500-2600 VCO operates from 2500 MHz to 2600 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -108 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-2500-2600 is packaged in the industry standard...

Fort Myers, FL, October 18, 2007 - Crystek's CVCO55CW-0800-1600 VCO operates from 800 MHz to 1600 MHz with a control voltage range of 0.5V~19V. This VCO features a typical phase noise of -100 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CW-0800-1600 is packaged in the industry standard 0.5-in....

Fort Myers, FL, October 2007 - Crystek's CVCO55CC-2900-3400 VCO operates from 2900 MHz to 3400 MHz with a control voltage range of 0.5V~18V. This VCO features a typical phase noise of -107 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-2900-3400 is packaged in the industry standard 0.5-in. x...

Fort Myers, FL, October 2007 - Crystek's CVCO55CW-0400-0800 VCO operates from 400 MHz to 800 MHz with a control voltage range of 0V~12V. This VCO features a typical phase noise of -105 dBc/Hz @ 10 KHz offset and has excellent linearity.

The model CVCO55CW-0400-0800 is packaged in the industry standard 0.5-in....

Fort Myers, FL, September 2007 - Crystek's CVCO55CC-2580-2860 VCO operates from 2580 MHz to 2860 MHz with a control voltage range of 0.5V~16V. This VCO features a typical phase noise of -110 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-2580-2860 is packaged in the industry standard 0.5-in. x...

Fort Myers, FL, September 2007 - Crystek's CVCO55CW-0200-0400 VCO operates from 200 MHz to 400 MHz with a control voltage range of 0V~5V. This VCO features a typical phase noise of -105 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CW-0200-0400 is packaged in the industry standard 0.5-in. x...

Fort Myers, FL, September 2007 - Crystek's CVCO55CW-1600-3200 VCO operates from 1600 MHz to 3200 MHz with a control voltage range of 0.5V~20V. This VCO features a typical phase noise of -93 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CW-1600-3200 is packaged in the industry standard 0.5-in. x...

Crystek's CVCO55CW-0100-0200 VCO operates from 100 MHz to 200 MHz with a control voltage range of 0V~5V. This VCO features a typical phase noise of -108 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CW-0100-0200 is packaged in the industry standard 0.5-in. x 0.5-in. SMD package. Input voltage is...

Fort Myers, FL, August 2007 - Crystek's CVCO55CC-2970-3230 VCO operates from 2970 MHz to 3230 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -104 dBc/Hz @ 10KHz offset and has excellent linearity.

The model CVCO55CC-2970-3230 is packaged in the industry standard 0.5-in. x...

Fort Myers, FL, February 2007 - Crystek Corporation has expanded its line of ultra-low phase noise Voltage Controlled Oscillators (VCOs) with a new coaxial resonator oscillator. The CVCO55CC-0827-0840 VCO operates from 827 MHz to 840 MHz with a tuning voltage range of 0.2 Vdc to 4.7 Vdc. This coaxial VCO...

Fort Myers, FL, September 2006 - Crystek Corporation has released its Model CVS575 - a 622.08MHz Voltage Controlled SAW Oscillator (VCSO) that is designed for high performance PLLs. It is an ideal choice for telecommunications application needing to meet low jitter generation requirements.

The lead-free, RoHS-compliant CVS575 is offered...

Fort Myers, FL, January 2006 - Crystek Crystals Corporation announces the release of a 1GHz Voltage Controlled Saw Oscillator (VCSO). Crystek designed the module using FR5 PCB and SAW crystal technology to provide a low noise, low jitter VCSO with true SineWave output. The resulting oscillator features -135dBc/Hz...

Fort Myers, FL, August 2005 - Crystek Corporation announces its entrance into the PLL/Synthesizer arena with the introduction of its CPLL66 family. The CPLL66 is a complete PLL/Synthesizer needing only an external frequency reference and supply voltages for the internal PLL (phase lock loop) and VCO (voltage controlled oscillator)....

Fort Myers, FL, April 2005 - Crystek Crystals Corporation has launched the CVSS-940 - a True SineWave Voltage Controlled Crystal Oscillator (VCXO) providing -150dBc/Hz noise floor and +/-50ppm Min. APR pullability. This high performance VCXO is available in the industry standard 9x14mm SMD package.

The CVSS-940 VCXO generates...

Fort Myers, FL, October 2004 - Crystek Crystals Corporation has released its smallest VCO (voltage controlled oscillator) package yet. The tiny CVCO25 oscillator family measures only 0.25 x 0.25 x 0.079 in. (6.35 x 6.35 x 2.0 mm) and provides excellent electrical performance. It generates frequencies from 100MHz...

Fort Myers, FL, May 2004 - Crystek Crystals Corporation has expanded its line of high-performance Voltage Controlled Oscillators (VCOs) with a new 5GHz model in a 0.5" x 0.5" standard SMD package. The CVCO55BH-5256-5356 VCO generates a frequency range of 5256 MHz to 5356 MHz with a tuning voltage...

Fort Myers, FL, April 2004 - Crystek Crystals Corporation continues to raise the frequency domain with the addition of their LVPECL product line. Offered in both XO (CCPD-033/034) and VCXO (CVPD-034) configurations, the line generates frequencies from 77~330Mhz. These timing control devices were designed to meet today's requirements...

Fort Myers, FL, March 2004 - Crystek Crystals Corporation has launched a new Low Current SineWave Oscillator providing -150dBc/Hz noise floor and consuming only 8mA Typical and 15mA Max current @ 3.3 volts. The output level is 0dBm min into 50 Ohms, and Harmonics are lower than -20dBc.

This...

Fort Myers, FL, February 2004 - Crystek Crystals Corporation has introduced a new line of high-performance Voltage Controlled Oscillators (VCOs). The CVCO55BE-2974-3274 VCO will be offered in a 0.5" x 0.5" standard SMD package.

The CVCO55BE generates frequencies between 2.974 GHz and 3.274 GHz with a control voltage range of...

Fort Myers, FL, January 2004 - Crystek Crystals Corporation has launched a new Ultra-Low Phase Noise HCMOS Oscillator providing -162dBc/Hz noise floor.

This high performance Oscillator is offered in a Clock version CCHD-950 and also in a VCXO version CVHD-950. Both are packaged in an FR5 9x14mm SMD package....

Fort Myers, FL, October 2003 - Crystek Crystals Corporation has launched a new line of Voltage Controlled Oscillators (VCOs). Crystek's new VCO line initially comprises three industry standard packages with additional packages being added by 1Q04.

Crystek VCOs are ideal for use in applications such as digital radio equipment,...

Fort Myers, FL, September 2003 - Crystek Crystals Corporation is now producing several new timing and frequency control products to support Texas Instruments' 1394b (FireWire®) devices. As previously announced, TI's 1394b (FireWire®) product, the TSB41BA3, is the first such device available for home networking of consumer, computing and audio/video...